When selecting a fan, the engineer will need several key pieces of information to establish the requirements of the application and provide a solution accordingly. One such characteristic is the duty point. For example, what is the air volume flow rate required and what is the pressure loss of the system? Units of Measurement The… Continue Reading
System Performance In general, fans are selected for their ability to deliver a required air volume flow rate against an estimated system resistance to flow, or pressure. This defines an Operating Point and is usually expressed in m³/h at Pascals, or cfm at inches Water Gauge. Volume Flow Rate Volume flow rate is calculated from… Continue Reading
Please note prior to fan selection: If you are not sure whether you need an explosion proof ATEX fan, or need to know the zone in which your application is classified, please consult an official authority in your country. As of 20th April 2016, the new Directive ATEX 2014-34 EU superseded the previous ATEX 94/9/EC… Continue Reading
With Ecodesign Directive 2009/125/EC (Energy related Products) the European Union has defined requirements for the environmentally sound design of energy consuming products. This directive is part of the 20-20-20 target, according to which energy use should be reduced by 20% and the share of renewable energies increased by 20%, by 2020. It replaces the EuP… Continue Reading
Reduction of energy requirements of 30% compared to other industrial fans helps preserve the environment. Continue Reading
When designing their latest fan, Ziehl Abegg developed an aero dynamic impeller based on the wing of an owl. The results are stunning, with minimal noise and maximum energy efficiency, meaning the Owlet fans really are the fan of the future. Electronically commutated direct-current external… Continue Reading
Industrial Dryers, Air Movement Systems & Industrial Fans for Biomass & the Renewable Energy Sector Moduflow Fan Systems Ltd has been designing, supplying and installing industrial fans since 1979 and Ron Whitworth, Managing Director has designed industrial fan systems for a number of Biomass Plants… Continue Reading
Applied directly over ovens and furnaces is one of the most common uses of industrial fans in the commercial kitchen and hospitality sector.
Moduflow are familiar with supplying industrial fans for use within the renewable energy market and offer a range of fans specially designed for use in Biomass fuel applications.
Our centrifugal fans with free running impellers are designed for installation into appliances such as air handling units.
Industrial fans are used across a whole host of machinery in food processing. Stainless steel varieties are favoured due to their hygienic and easy to clean material composition.
The extraction of corrosive fumes should be done with chemical/corrosion resistant fans. Polypropylene is the standard material which can withstand the nature of the chemical gases that pass through the scroll and the impellers.
Moduflow is the trading name of
Moduflow Fan Systems Ltd,
Registered in England
Company No.04563686
© 2019 Moduflow Fan Systems
VAT NUMBER GB 327568573